55mm Synthetic Football Artificial Grass PE Material

synthetic grass warehouse artificial grass with artificial turf installation

Good Drainage:

The football grass backing has drainge holes, which is suitable for outdoor usage and easy to drain

Trade information:

Installation of football grass:

1.1. Inspection:

Inspect the foundation to ensure it has a flat and smooth surface and appropriate slopes,making sure the

foundation is qualified for installing artificial turf;

1.2. Measuring:

Locate the centers of the ground and the two semicircles, and according to these three centers locate the

intersecting point of half-way lines and touchlines, and then determine the positions of functional lines

and spot by using Pythagorean proposition;

2. Turf layout:

According to drawing, position the turf rolls on the exact places along the touchline.The turf with white

lines should be placed at the half-way lines and base line, and then lay out the rolls in order;

3. Preparing functional line:

Cut white turf piece into strips(width to be as per actual need) for white functional lines(half-way lines,

base lines etc.), and put them aside preparing for Artificial Grass installation;

4. Seaming:

The adiacent turf rolls must be join together with 20~30mm excess on both sides, then cut the excess

part with a special cutting knife on the joint center and trim the cut to make the turf join perfectly

together.

5.1. Installing functional lines:

Measure and re-position the functional line on the turf that has been all well joined on the ground. Cut

the turf out and place the seam tape beneath the cuts, then spread the adhesive on the seam tape and

install the well-prepared functional lines, press it firmly to ensure the immobility.

5.2. Trimming:

Inspect the finished lawn, if any uneven found, cut it open, pull it straight and cut the excess away.

And rejoin it with adhesive;

6. Infilling sand:

Place the sand piles on the finished lawn on different spots evenly at a distance of 4m from each other,

then spread them evenly on the lawn(the quantity if sand depends on the pile height of the turf).

7. Infill rubber granules:

After sand infilling, Place the rubber granules piles on the lawn on different spots evenly at a distance

of 4m from each other, then spread them evenly on the lawn(the quantity of sand depends on the pile

height of the turf).

8. Combing:

Once the infilling is finished, comb the turf once more with the combing machine to make the fibers

point up to the sky.

9. Inspection:

Inspect the entire finished lawn as per concerned standards and requirement.If any defects found,

correct it.

Q1: Is the grass available for rainy or hot weather?
A1: Yes, Doleader grass is no problem for rainy or hot weather, grass has drainage holes for rainy days, it’s uv protected to
prolong lifetime and prevent fading.
Q2: Is the grass safe for children and pets?
A2: Yes sure, it’s safe, strict testing is carried out to ensure it free of any hazardous elements making them safe for children
and pets. Artificial grass has passed the REACH testing certificate.